What should be paid attention to when installing UPVC sliding doors?

Before installation, it is necessary to accurately measure the size of the window, including width, height and depth, and record these measurements. According to the measurement results, determine the position and size of the UPVC sliding door to ensure that the door leaf can fit the window perfectly. Before installation, it is necessary to check whether the wall surface is flat. If the surface is uneven, it needs to be trimmed and leveled to ensure that the door frame and door leaf can be installed smoothly.

According to actual needs, determine the opening direction and method of the UPVC sliding door, such as pushing and pulling to the left or right, and one-way or two-way opening. This will affect the installation position of the door frame and door leaf and the setting of the slide rail and pulley. Before installation, it is necessary to prepare the required construction tools and materials, such as electric drills, wrenches, saws, screwdrivers, etc. At the same time, ensure that the UPVC sliding door and its accessories are complete and meet the design requirements.

According to the window size, cut the door frame material to the appropriate length and width. Use screws to fix the door frame, ensure the horizontality and verticality of the door frame, and use a level to adjust it. Install the door frame waterproof baffle to protect the door frame from rainwater leakage. Use screws to fix the door leaf to the door frame, making sure that the door leaf is parallel and perpendicular to the ground and wall.

When installing the slide rail, you need to choose the appropriate type of slide rail according to the weight and size of the door leaf. Put the pulley into the slide rail and adjust the position and height of the pulley to ensure that the door leaf can be pushed and pulled smoothly. If the door leaf has difficulty in pushing and pulling, you need to adjust the position or tightness of the slide rail and pulley.

Install door leaf accessories such as handles, sealing strips and glass. Ensure that the door leaf is pushed and pulled smoothly and firmly by adjusting the position of the slide rail and pulley, as well as the tightness of the accessories. Install the door leaf regulator and lock. The door leaf regulator can control the degree of opening of the door leaf, while the lock is used to ensure the safety of the door.

After the construction is completed, perform preliminary debugging to check whether the door leaf is pushed and pulled and the door lock function is normal. If you find that the door leaf is not pushed and pulled smoothly or the door lock is not firm, repair and adjust it in time.

During the installation process, you need to comply with relevant regulations and operating requirements to ensure that the construction process is safe and reliable. When using power tools, you need to pay attention to electrical safety to avoid accidents such as electric shock or fire. If you encounter problems or uncertainties during the installation process, you can seek guidance and help from professionals.